14 Coolest Pinewood Derby Speeds

 

Pinewood Derby Speed Axles - Graphite Coated

Pinewood Derby Speed Axles – Graphite Coated

Pinewood Derby Speed Axles – Graphite Coated - Our tests have shown no reduction in speed after more than 20 races sold 4 per set. The graphite is bonded to the axle so it will last many races. Our special process coats the axle with an even layer of high grade graphite.

 

Polished Pinewood Derby Speed Axles

Polished Pinewood Derby Speed Axles

Polished Pinewood Derby Speed Axles - Axle head is round and centered on the axle shaft. Shaft is polished to 3,000 grit. Axle head is slightly and accurately beveled to minimize contact with the outside wheel hub. No burrs and crimp marks, eliminating tedious work. Accurate, round shaft to improve performance.

 

Pinewood Derby Speed Wheels - Derby Dust Black Ops - Black by Derby Dust Black Ops

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Black by Derby Dust Black Ops

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Black by Derby Dust Black Ops - Bodies- low profile in front with larger profile in back what does this do it has to do with aerodynamics and decreasing drag competition does not. Pinewood derby speed wheels, derby dust black op’s, black. Our cars are perfected balanced for speed weight balanced ½-1″ in front of rear axle for maximum potential energy competition does not. Surface area next to wheel on the body that could be a potential speed robbing point competition does not. Reduced the wheel base on the front end to reduce wobble and track better competition does not.

 

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble -Wiggle

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble -Wiggle

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble -Wiggle - Reduced the wheel base on the front end to reduce wobble and track better competition does not. Machined ready to race bsa official pinewood derby speed axles and wheels. Our cars are perfected balanced for speed weight balanced ½-1″ in front of rear axle for maximum potential energy competition does not. Surface area next to wheel on the body that could be a potential speed robbing point competition does not. Bodies- low profile in front with larger profile in back what does this do it has to do with aerodynamics and decreasing drag competition does not.

 

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble - Bodies- low profile in front with larger profile in back what does this do it has to do with aerodynamics and decreasing drag competition does not. Surface area next to wheel on the body that could be a potential speed robbing point competition does not. Our cars are perfected balanced for speed weight balanced ½-1″ in front of rear axle for maximum potential energy competition does not. Reduced the wheel base on the front end to reduce wobble and track better competition does not. Machined ready to race bsa official pinewood derby speed axles and wheels.

 

Pinewood Derby Speed Wheels - Derby Dust Black Ops - RED

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – RED

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – RED - Edge of wheel is left factory to retain maximum strength as to reduce flexion and also to keep it within the specifications of the most strict of wheel rules. Derby dust black op’s colored wheels have reamed inner hub at 0980″ reduced outer hub we removed about 1/3 of the outer hub this modification decreases friction (red area in picture) we have chosen to have a wider point of contact between your axle and wheel we feel the larger outer ring provides more stable wheel travel when compared to just a rounded hub as most aftermarket wheels utilize. Mold marks are removed while retaining near full tread/beaded edges outer wheel diameter will always be 1170 or greater machined outer tread near identical to uncut wheels no high pitched wheels here there is a reason they are made this way. Weight reduction is about 37% from stock giving this wheel an average weight of 166 grams see image to left to see what was done our material is removed with precision cnc lathe using flood coolant to maintain proper plastic temperature to eliminate warping related to heat if plastic heats up, then it will cool out of round important process that most do not consider there is no step present it is a gradual taper all the way to the front of the wheel. We do not reduce the width of the wheel since most packs do not allow this modification most are very descriptive about this modification the overall width is factory 0360″.

 

Pinewood Derby Speed Wheels

Pinewood Derby Speed Wheels

Pinewood Derby Speed Wheels - Legal for most packs please check your rules. Cnc machined bsa pinewood derby wheels, 1174″ outer diameter. Bsa lettering in tact. Reamed inner bore to 00980″ to remove manufacturing flaws. Outer diameter turned to remove mold marks, give a consistent tread, retaining bead (crimp) marks.

 

Pinewood Derby Speed Wheels - Derby Dust Black Ops - Orange

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Orange

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Orange - Weight reduction is about 37% from stock giving this wheel an average weight of 166 grams see image to left to see what was done our material is removed with precision cnc lathe using flood coolant to maintain proper plastic temperature to eliminate warping related to heat if plastic heats up, then it will cool out of round important process that most do not consider there is no step present it is a gradual taper all the way to the front of the wheel. We do not reduce the width of the wheel since most packs do not allow this modification most are very descriptive about this modification the overall width is factory 0360″. Derby dust black op’s colored wheels have reamed inner hub at 0980″ reduced outer hub we removed about 1/3 of the outer hub this modification decreases friction (red area in picture) we have chosen to have a wider point of contact between your axle and wheel we feel the larger outer ring provides more stable wheel travel when compared to just a rounded hub as most aftermarket wheels utilize. Edge of wheel is left factory to retain maximum strength as to reduce flexion and also to keep it within the specifications of the most strict of wheel rules. Mold marks are removed while retaining near full tread/beaded edges outer wheel diameter will always be 1170 or greater machined outer tread near identical to uncut wheels no high pitched wheels here there is a reason they are made this way.

 

Pinewood Derby Speed Wheels - Derby Dust Black Ops - Yellow

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Yellow

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Yellow - Mold marks are removed while retaining near full tread/beaded edges outer wheel diameter will always be 1170 or greater machined outer tread near identical to uncut wheels no high pitched wheels here there is a reason they are made this way. Weight reduction is about 37% from stock giving this wheel an average weight of 166 grams see image to left to see what was done our material is removed with precision cnc lathe using flood coolant to maintain proper plastic temperature to eliminate warping related to heat if plastic heats up, then it will cool out of round important process that most do not consider there is no step present it is a gradual taper all the way to the front of the wheel. We do not reduce the width of the wheel since most packs do not allow this modification most are very descriptive about this modification the overall width is factory 0360″. Edge of wheel is left factory to retain maximum strength as to reduce flexion and also to keep it within the specifications of the most strict of wheel rules. Derby dust black op’s colored wheels have reamed inner hub at 0980″ reduced outer hub we removed about 1/3 of the outer hub this modification decreases friction (red area in picture) we have chosen to have a wider point of contact between your axle and wheel we feel the larger outer ring provides more stable wheel travel when compared to just a rounded hub as most aftermarket wheels utilize.

 

Pinewood Derby Speed Wheels by Derby Dust Lightly Machined

Pinewood Derby Speed Wheels by Derby Dust Lightly Machined

Pinewood Derby Speed Wheels by Derby Dust Lightly Machined - Our cars are perfected balanced for speed weight balanced ½-1″ in front of rear axle for maximum potential energy competition does not. Bodies- low profile in front with larger profile in back what does this do it has to do with aerodynamics and decreasing drag competition does not. Surface area next to wheel on the body that could be a potential speed robbing point competition does not. Reduced the wheel base on the front end to reduce wobble and track better competition does not. Machined ready to race bsa official pinewood derby speed axles and wheels.

 

Pinewood Derby Speed Wheels - 1180 Factory Select

Pinewood Derby Speed Wheels – 1.180″ Factory Select

Pinewood Derby Speed Wheels – 1.180″ Factory Select - What is left is a near perfect factory wheel. We have sorted through the wheels and hand picked the ones with flawless bores. We have also inspected the outer tread for seam marks that would be an issue. Derbydust. Html. More info https//www. Com/xcart/pinewood-derby-modified-wheels-derby-dust-black-ops-wheels. For those packs that have the pickest of rules, we have put together the the best “limited” choice that you have.

 

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble -KeyHole

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble -KeyHole

Pinewood Derby Car Kit Fast Speed Complete Ready to Assemble -KeyHole - Our cars are perfected balanced for speed weight balanced ½-1″ in front of rear axle for maximum potential energy competition does not. Surface area next to wheel on the body that could be a potential speed robbing point competition does not. Machined ready to race bsa official pinewood derby speed axles and wheels. Reduced the wheel base on the front end to reduce wobble and track better competition does not. Bodies- low profile in front with larger profile in back what does this do it has to do with aerodynamics and decreasing drag competition does not.

 

Pinewood Derby Speed Wheels 4x - Derby Dust Asset by Derby Dust Asset

Pinewood Derby Speed Wheels (4x) – Derby Dust Asset by Derby Dust Asset

Pinewood Derby Speed Wheels (4x) – Derby Dust Asset by Derby Dust Asset - Surface area next to wheel on the body that could be a potential speed robbing point competition does not. Reduced the wheel base on the front end to reduce wobble and track better competition does not. Machined ready to race bsa official pinewood derby speed axles and wheels. Our cars are perfected balanced for speed weight balanced ½-1″ in front of rear axle for maximum potential energy competition does not. Bodies- low profile in front with larger profile in back what does this do it has to do with aerodynamics and decreasing drag competition does not.

 

Pinewood Derby Speed Wheels - Derby Dust Black Ops - Blue

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Blue

Pinewood Derby Speed Wheels – Derby Dust Black Op’s – Blue - Mold marks are removed while retaining near full tread/beaded edges outer wheel diameter will always be 1170 or greater machined outer tread near identical to uncut wheels no high pitched wheels here there is a reason they are made this way. Edge of wheel is left factory to retain maximum strength as to reduce flexion and also to keep it within the specifications of the most strict of wheel rules. We do not reduce the width of the wheel since most packs do not allow this modification most are very descriptive about this modification the overall width is factory 0360″. Weight reduction is about 37% from stock giving this wheel an average weight of 166 grams see image to left to see what was done our material is removed with precision cnc lathe using flood coolant to maintain proper plastic temperature to eliminate warping related to heat if plastic heats up, then it will cool out of round important process that most do not consider there is no step present it is a gradual taper all the way to the front of the wheel. Derby dust black op’s colored wheels have reamed inner hub at 0980″ reduced outer hub we removed about 1/3 of the outer hub this modification decreases friction (red area in picture) we have chosen to have a wider point of contact between your axle and wheel we feel the larger outer ring provides more stable wheel travel when compared to just a rounded hub as most aftermarket wheels utilize.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.