15 Best and Coolest Frskies

 

FrSky S8R 816 Channel Receiver with 3-axis Stabilization

FrSky S8R 8/16 Channel Receiver with 3-axis Stabilization

FrSky S8R 8/16 Channel Receiver with 3-axis Stabilization - 47×26. The s8r is a frsky x-series receiver with built in 3-axis stabilization. Specification:   dimension 46. Lua. 12 mm (l×w×h)   weight 14g   number of channels 8/16ch (1-8ch from conventional channel outputs, 1-16ch from sbus output)   with rssi pwm output on board pwm voltage output(0-3. For conventional fixed wing and glider models it will support stabilization, automatic level, hover and knife-edge flight modes, for delta wings or flying wings and v-tail models it supports stabilization and automatic level flight modes. Config or s8r. 78×14. Tip use the s8r with 3-axis stabilization as a slave receiver with the rb-10 to give you that extra peace of mind by buying you precious time to bring your model home. 3v), 100hz, 1500±500us   operating current [email protected]   operating voltage range 4. 0-10v   operating range full range   gyroscope measurement range ±2000dps   accelerometer measurement range ±4g   firmware upgradeable   compatibility frsky taranis x9d plus/x9e/x7/horus x12s/xjt in d16 mode (ps s8r-eu only works with frsky taranis x9d plus/x9e/x7/horus x12s/xjt in d16-eu mode). You can edit the type of model and manipulate all these features via the s8r. The s8r can also be used as a standard 8 channel x series receiver if it is required.

 

FrSky L9R Long Range Receiver for FrSky Taranis X9DPLUS X9E X12S

FrSky L9R Long Range Receiver for FrSky Taranis X9DPLUS X9E X12S

FrSky L9R Long Range Receiver for FrSky Taranis X9DPLUS X9E X12S - They have been working on this receiver for a long time, and advanced filter makes this receiver work with a bone stock frsky taranis or frsky xjt module yep, you heard it, nothing special is needed to double your range. More number of channels 1~9ch from conventional channel outputs, 1~12ch from sbus port. With rssi output. Longer operating range 2 times of the operating range for x-series receiver. Testing shows it is reliably twice the range of frsky’s telemetry receivers, some claim more.

 

FrSky Taranis Q X7 24GHz ACCST 16CH Radio Transmitter Remote Controller - White Excludes Battery Battery Holder and Charger

FrSky Taranis Q X7 2.4GHz ACCST 16CH Radio Transmitter Remote Controller – White (Excludes Battery, Battery Holder and Charger)

FrSky Taranis Q X7 2.4GHz ACCST 16CH Radio Transmitter Remote Controller – White (Excludes Battery, Battery Holder and Charger) - The radio includes a haptic vibration feedback system which provides an alternative feedback system to the voice and sound alert warnings. This 16 channel radio has smooth ball bearing gimbals and is loaded with six switches and two knobs. Equipped with an audio jack output and trainer port as well. One of the best features of the taranis q x7 is its full telemetry capability, as well as rssi signal strength feedback. It runs on opentx and files can be shared with the popular x9d plus. Wheel and center enter button makes navigating the backlit menu easy and precise. This is the new taranis q x7 radio by frsky. The microsd card slot offers unlimited model memory options, it also has a usb port for upgrades and to connect to a pc for adjusting settings. The q x7 features a modern new and sleek look along with an easy to navigate menu and intuitive scroll wheel and button controls. And of course, a module bay for use with jr-type modules that can be used with other protocol receivers and with the use of a frsky xjt module this radio can support up to 32-channels. Other features include receiver match, real-time flight data logging and super low latency for precision flying. It is a lower cost and simplified version of the widely popular frsky taranis radio and operates on opentx just as the taranis does.

 

FrSky Taranis X-Lite Pro 24GHz 24CH Radio with RF Module Installed Access Protocol and para Wireless Training System

FrSky Taranis X-Lite Pro 2.4GHz 24CH Radio with RF Module Installed Access Protocol and para Wireless Training System

FrSky Taranis X-Lite Pro 2.4GHz 24CH Radio with RF Module Installed Access Protocol and para Wireless Training System - Supports wired training function high-efficiency quick-charge system. Supports motion sensing control haptic vibration alerts and voice speech outputs. Ergonomic and compact design mc12 lite all-metal cnc digital hall sensor gimbal. Upgraded rf module with installed access protocolmore sensitive and lower latency (down to 12ms)high-speed digital interface of internal and external modules (baud rate 450k). New para wireless training systemhigh-speed training system with a lower latencycompatible with frsky free link app and airlink s via mobile devices.

 

EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop 75mm BNF FRSKY Ready to Fly FPV Beginners Durable Inverted Motors Full Acro Level Horizon Mode

EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop 75mm BNF FRSKY Ready to Fly FPV Beginners Durable Inverted Motors Full Acro Level Horizon Mode

EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop 75mm BNF FRSKY Ready to Fly FPV Beginners Durable Inverted Motors Full Acro Level Horizon Mode - By creating an entirely new power system from the ground up, emax has achieved the perfect power to weight ratio, utilizing a lightweight micro brushless motor paired together with a state-of-the-art radical propeller design matched to the performance curve of the entire system. 35v. 1 x manual frsky d8 drone weight 29grams weight with battery 42grams with 450mah 1s battery frame material polypropylene propeller 40mm diameter blades 3 pitch 23mm weight 0. This product does not come with controller or goggles, it is the drone alone. 5mm ( 08025 ) kv 15000kv flight controller f4(matekf411 firmware) escs 4 in 1 3a receiver emax tiny receiver ( compatible with frsky d8 mode ) vtx power 25mw channels 37ch camera 600tvl cmos battery 1s 4. 5g motor long life bearings and beeper stator 8mm x 2. 35v hv battery 1 x bag of spare parts that include 1 battery connector and motor screws 1 x usb battery charger with x 4 connectors, this allows you to charge 4 batteries simultaneously at 4. Integrated into the tinyhawk is a video transmission system with a first-person-view camera, allowing the pilot to utilize a compatible virtual reality goggle or screen to experience a pilot’s view firsthand. The tinyhawk offers incredible performance, thanks to a powerful f4 processor and ultra fast gyro system, creating the most stable flight experience ever in a miniature racing drone the size of the palm of your hand. 35v 450mah lihv discharge rating 80c / 160cdismantling any conventional thinking, emax went back to the drawing board and created something new to reach all of its design goals with no compromise. Do not attempt to connect a 2s battery this quad is 1s battery only product includes1 x tinhawk racing drone 1 x carrying case 1 x 450mah 1s 4.

 

BETAFPV F4 1-2S FC AIO Brushless Flight Controller SPI Frsky Receiver ESC OSD Smart Audio with JST-PH20 Cable for 2S Brushless FPV Whoop Drone Beta85 Pro2 Beta75 Pro2 Beta65 Pro2

BETAFPV F4 1-2S FC AIO Brushless Flight Controller SPI Frsky Receiver ESC OSD Smart Audio with JST-PH2.0 Cable for 2S Brushless FPV Whoop Drone Beta85 Pro2 Beta75 Pro2 Beta65 Pro2

BETAFPV F4 1-2S FC AIO Brushless Flight Controller SPI Frsky Receiver ESC OSD Smart Audio with JST-PH2.0 Cable for 2S Brushless FPV Whoop Drone Beta85 Pro2 Beta75 Pro2 Beta65 Pro2 - The default configuration from factory is frsky d16 mode (frsky_x) built in frsky receiver is compatible with taranis, taranis plus, x9e, horus x12s, xjt modules in betaflight configuration, it should be seted as frsky_d receiver (aka frsky d8 mode) or frsky_x receiver (aka frsky d16 mode) in spi rx mode. This aio f4 2s fc also can be used on 2s brushless whoop drone beta pro 2 series like beta85pro2 beta75pro2 and beta65pro2, performance very well even no wash-out issue then, so you can just take this aio fc to replace the stock fc&esc. The power supply is 1s~2s, it comes with a 2s cable pigtail jst-ph 20 connector in default, you can use 2pcs 1s 300mah battery work on this if you want to use it with 2s battery, please change the cable to xt30 wwwamazoncom/dp/b07ffq2txq. Betafpv f4 2s aio fc is highly integrated with a betaflight f411 processor fc, betaflight osd, spi frsky receiver and 1-2s 5a esc, suitable for a lighter 2s whoop drone, like beta65 pro 2 or beta75 pro 2 etc saving much weight for a faster fly experience. The 2s f4 fc aio brushless flight controller comes with a spi frsky receiver, binding procedure is easier than before, no need to click the bind button when power on manual https//betafpvfreshdeskcom/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual.

 

FrSky Taranis Q X7 24GHz 16CH Transmitter Remote Controller Black with Battery and Charger

FrSky Taranis Q X7 2.4GHz 16CH Transmitter Remote Controller (Black, with Battery and Charger)

FrSky Taranis Q X7 2.4GHz 16CH Transmitter Remote Controller (Black, with Battery and Charger) - Other features include receiver match, real-time flight data logging and super low latency for precision flying. This 16 channel radio has smooth ball bearing gimbals and is loaded with six switches and two knobs. The q x7 features a modern new and sleek look along with an easy to navigate menu and intuitive scroll wheel and button controls. And of course, a module bay for use with jr-type modules that can be used with other protocol receivers and with the use of a frsky xjt module this radio can support up to 32-channels. The microsd card slot offers unlimited model memory options, it also has a usb port for upgrades and to connect to a pc for adjusting settings. Equipped with an audio jack output and trainer port as well. This is the new taranis q x7 radio by frsky. The radio includes a haptic vibration feedback system which provides an alternative feedback system to the voice and sound alert warnings. Wheel and center enter button makes navigating the backlit menu easy and precise. One of the best features of the taranis q x7 is its full telemetry capability, as well as rssi signal strength feedback. It is a lower cost and simplified version of the widely popular frsky taranis radio and operates on opentx just as the taranis does. It runs on opentx and files can be shared with the popular x9d plus.

 

FrSky 150A Current Sensor Smart Port Enable

FrSky 150A Current Sensor (Smart Port Enable)

FrSky 150A Current Sensor (Smart Port Enable) - Package included 1 x frsky fcs-150a smart-port ampere sensor. Maximum safe current 150a maximum battery voltage 4~10v. Mode fcs-150a weight 201g. It is designed for frsky smart port enabled systems, and can measure current (a) when connected between a battery and esc. Compatibility frsky smart port enabled receivers, such as x8r, x6r, x4r, etc.

 

FrSky Air Speed Sensor Normal PrecisionSmart Port Enable

FrSky Air Speed Sensor Normal Precision(Smart Port Enable)

FrSky Air Speed Sensor Normal Precision(Smart Port Enable) - Available in two options model name ass-70 specifications operational voltage dc 4 -10 v current consumption [email protected] measure airspeed range 0~270km/h (0~167. With its easy install it is an easy way to get air speed data. 26×12. 6 mm pitot tube hose silicon, clear, 3 feet (1 meter), 2. 2mm id, 3. There are 2 versions of air speed sensors. Just install the pitot tube as far away from any prop wash or any disturbed air as possible, install the sensor in the fuselage, run the silicon tubes, and plug into the receiver, or another smart port sensor, and enjoy this sensor not only can send speed data to your taranis, but can also, when set up properly, warn the pilot of low airspeed, log airspeed data, check your top speed, program your radio automatically drop the landing gear at a preset airspeed, etc. 7 mph, (270 kmh). The frsky air speed sensor was designed for the frsky smart port enabled system. The sp-ass-70 can accurately measure airspeed up to 167. 7mile/h ) circuit board weight 7 g, dimensions 33. 55mm pitot tube weight 4 g, length 101mm, diameter 2. The sp-ass-100 measures up to 223. 8mm od reset button, user calibration compatibility frsky smart port enabled receivers, such as x8r, x6r, x4r, etc. 7 mph, (360 km/h). Frsky’s new airspeed sensor smart port sensor provides air speed data for the full flight via the smart port telemetry on all the xr range of receivers. 29×22.

 

FrSky XM Plus Mini Receiver up to 16CH 16g Full Range fit for Micro Drone

FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone

FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone - Weight16g, dimension 2151235mm(l x w x h)frsky xm plus mini receiver is perfect for those racers who are looking to lower their auw, especially for fpv racing drone, mini drone, such as 130 110 drone . Up to 16ch from sbus ( ch1-ch15 for pwm, ch16 rssi for fc,such as f3, naze32 flight controller ) compatible —— compatible with frsky x9d plus x9e x12s transmitter. Xm plus receiver supports failsage function for all channels protect your perfectly henever the control signal is lost for a period of time. This insanely tiny 24ghz diversity receiver available from frsky is the next big thing in miniaturization of racing craftperfect for those racers who are looking to lower their auw full range, so identical to your x4r and d4r setups. Frsky xm plus is dual antenna ( frsky xm is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone anytime.

 

FrSky Taranis Q X7 24GHz 16CH Transmitter Black

FrSky Taranis Q X7 2.4GHz 16CH Transmitter (Black)

FrSky Taranis Q X7 2.4GHz 16CH Transmitter (Black) - The q x7 features a modern new and sleek look along with an easy to navigate menu and intuitive scroll wheel and button controls. The microsd card slot offers unlimited model memory options, it also has a usb port for upgrades and to connect to a pc for adjusting settings. One of the best features of the taranis q x7 is its full telemetry capability, as well as rssi signal strength feedback. It is a lower cost and simplified version of the widely popular frsky taranis radio and operates on opentx just as the taranis does. Overall this radio has the features of more expensive transmitters at an unprecedented value. Equipped with an audio jack output and trainer port as well. And of course, a module bay for use with jr-type modules that can be used with other protocol receivers and with the use of a frsky xjt module this radio can support up to 32-channels. The radio includes a haptic vibration feedback system which provides an alternative feedback system to the voice and sound alert warnings. All q x7s now come with a balance charge port. With the included cable, use the frsky fcx07 charger to charge your q x7 using rechargeable batteries. Other features include receiver match, real-time flight data logging and super low latency for precision flying. To power your q x7, use a rechargeable pack such as this 3000mah battery. Wheel and center enter button makes navigating the backlit menu easy and precise. This is the new taranis q x7 radio by frsky. Specificationsmodel name taranis q x7operating voltage range 6~15v (2s, 3s lipos are acceptable)operating current 210ma maximum (both rf modu. Or this 2100mah battery. Charger not included. Note the q x7 now ships without the aa battery tray. This 16 channel radio has smooth ball bearing gimbals and is loaded with six switches and two knobs. It runs on opentx and files can be shared with the popular x9d plus.

 

FrSky Taranis X9D Plus Transmitter Parts 2 Position Long Toggle Switch by FrSky

FrSky Taranis X9D Plus Transmitter Parts 2 Position Long Toggle Switch by FrSky

FrSky Taranis X9D Plus Transmitter Parts 2 Position Long Toggle Switch by FrSky - This is a 2 position long switch as used in the sf location on the top left of the taranis x9dsoldering is required to swap out this switch. Style left. 1x frsky x-lite long 3-position switch + short momentary switch (left).

 

Frsky Taranis X9D Plus Transmitter Parts One Position Long Toggle Switch

Frsky Taranis X9D Plus Transmitter Parts One Position Long Toggle Switch

Frsky Taranis X9D Plus Transmitter Parts One Position Long Toggle Switch - The default configuration from factory is frsky d16 mode (frsky_x) built in frsky receiver is compatible with taranis, taranis plus, x9e, horus x12s, xjt modules in betaflight configuration, it should be seted as frsky_d receiver (aka frsky d8 mode) or frsky_x receiver (aka frsky d16 mode) in spi rx mode. The 2s f4 fc aio brushless flight controller comes with a spi frsky receiver, binding procedure is easier than before, no need to click the bind button when power on manual https//betafpvfreshdeskcom/support/solutions/articles/27000049912-f4-1s-brushless-fc-manual. The power supply is 1s~2s, it comes with a 2s cable pigtail jst-ph 20 connector in default, you can use 2pcs 1s 300mah battery work on this if you want to use it with 2s battery, please change the cable to xt30 wwwamazoncom/dp/b07ffq2txq. Frsky taranis x9d plus transmitter parts one position long toggle switch. This aio f4 2s fc also can be used on 2s brushless whoop drone beta pro 2 series like beta85pro2 beta75pro2 and beta65pro2, performance very well even no wash-out issue then, so you can just take this aio fc to replace the stock fc&esc.

 

FrSky X-Lite Long 3-Position Switch  Short Momentary Switch Left FPV Drone Racing

FrSky X-Lite Long 3-Position Switch + Short Momentary Switch (Left) FPV Drone Racing

FrSky X-Lite Long 3-Position Switch + Short Momentary Switch (Left) FPV Drone Racing - One 3-position switch and one momentary switch. Specificationstype 3 position + momentarystyle leftincludes1x frsky x-lite long 3-position switch + short momentary switch (left). A replacement set of left side switches for the frsky x-lite.

 

FrSky M9 Hall Sensor Gimbal for Taranis X9D X9d Plus

FrSky M9 Hall Sensor Gimbal for Taranis X9D & X9d Plus

FrSky M9 Hall Sensor Gimbal for Taranis X9D & X9d Plus - 50 mv/g linear output voltage range 0. The highly sensitive hall sensors will not wear out quickly. 1 ~ ( vcc +0. 0 ~ ±0. Upgrade your taranis x9d with this plug-n-play high resolution m9 gimbal from frsky. Thicker 4mm stick ends give you a solid link to your controls. 5 × vcc noise (no load) ≤40mvpp. This is a must have accessory for achieving those precision flight maneuvers. Fully adjustable tension and easily disable the self centering axis with one screw. 1) v quiescent output (ta = 25°c, b = 0 g) 0. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Specification supply voltage (vcc) dc 3. 5v sensitivity 2.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.