20 Most Wanted Star Wars Models

 

Fascinations Metal Earth Star Wars TIE Fighter 3D Metal Model Kit - The tie fighter is the signature starfighter of the galactic empire. Difficulty level moderate. 6×2. 4×2. Each model starts out as 4 inch square metal sheets and you simply pop out the pieces using wire cutters and follow the included directions to assemble your model. The metal earth star wars models are amazingly detailed etched models that are fun and satisfying to assemble. They are instantly recognizable from the roar of their engines. No glue or solder needed. The model is 2. 9 when assembled.

 

Star Wars X-WING FIGHTER MODEL KIT SNAPFAST AMT ERTL - Easy snapfast kit. Dimensions not stated but box is approx 10″ x 7″. Rare edition. Paint & glue not included, scale model kit by mpc ertl. X-wing fighter.

 

Star Wars Tie Fighter Plus Pack Model Kit - New/factory sealed. Plus pack includes testors-no-toxic paint & glue, 1 paint brush. Model comes with everything to paint,glue,build. Perfect gift s9.

 

Revell SnapTite Star Wars TIE Fighter Plastic Model Kit - This easy-to-assemble snaptite kit features multi-colored, painted plastic parts, an opening hatch, a detailed cockpit, an imperial pilot figure and a movable display stand. . The tie designation comes from the spacecrafts twin ion engine system, which is powered by solar panels on each wing. 22mm)height 7-3/8in (187. While tie fighters lack shields or hyperdrive capabilities, they have been known to outrun and outmaneuver rebel alliance spacecraft on more than one occasion. 16mm)wingspan 5-7/8in (149. Rev1875 tie fighter snaptite by revell highly detailed plastic piecesno painting required, multicolored pre-painted partsopening hatch to show detailed cockpit and imperial pilot figureunique movement display standlength 6-3/16in (157. 32mm)skill level 1parts 30fans of the original star wars trilogy will no doubt recognize the galactic empires tenacious tie fighters.

 

Lego Star Wars Model Toys 75077 Homing Spider Droid With Box Hot 2015 New. - Includes a battle droid figure with a blaster pistol features realistic detailing, adjustable legs, flick missile and a mini cockpit for the battle droid figure to sit in move into position and fire the flick missile amazing miniature version of the homing spider droid featured in the star wars movies recreate mini geonosian battles with the 75076 lego® star wars republic gunship as seen in star wars episode ii attack of the clones measures over 3″ (8cm) high, 2″ (6cm) long and 3″ (9cm) wide. This amazing small-scale version of the droid featured in the star wars movies has cool detailing, adjustable legs, flick missile and even a mini cockpit for the battle droid to sit in. Go on the hunt on planet geonosis with the heavily armored lego® star wars homing spider droid microfighter. Give the order to take down the republican forces includes a battle droid figure with a blaster.

 

Fascinations Metal Earth Star Wars Force Awakens Kylo Ren’s Command Shuttle 3D Metal Model Kit - The metal earth star wars models are amazingly detailed etched models that are fun and satisfying to assemble. 5 inches when assembled. Difficulty level moderate. The first order’s top officers travel in upsilon-class command shuttles that look like grim birds of prey. No glue or solder needed. These ships’ massive wings are packed with defensive systems to protect their valuable passengers. The upper wings contain advanced sensor suites that scan for enemies, while the lower wings house efficient shield projectors and powerful jammers. Upon landing, the wings rise from flight mode and then retract, encasing the upper wings’ sensor arrays in thick armor. Kylo ren’s command shuttle was an upsilon-class command shuttle utilized by lord kylo ren, who was a member of the knights of ren and the first order around thirty years after the battle of endor. The model is 4x2x3. Each model starts out as 4 inch square metal sheets and you simply pop out the pieces using wire cutters and follow the included directions to assemble your model.

 

Star Wars Return of the Jedi AT-AT Commemorative Edition Scale Model Kit - Paint & glue not included, scale model kit by mpc ertl. Very rare vintage rotj commemorative edition. Approx 8″ tall, moveable control module, poseable front legs. Includes luke skywalker’s snowspeeder. Accurate reprodution of the most memorable at-at walker.

 

Screamin 1:4 18″ Star Wars Darth Vader Vinyl Model Figure +Light Saber Kit #3200 - Over 18 inches tall. From the star wars film trilogy. Ultrafine detail and likeness.

 

Fascinations Metal Earth Star Wars Imperial Shuttle 3D Metal Model Kit - When in flight, the side wings fold out for greater stabilization. Each model starts out as 4 inch square metal sheets and you simply pop out the pieces using wire cutters and follow the included directions to assemble your model. Even the empire’s elite, like darth vader and the emperor palpatine used these shuttles. It is equipped with a hyper drive. It has three wings a stationary center foil and two articulated flanking wings. No glue or solder needed. An elegant example that stands apart from typical brutish imperial engineering, the lambda-class shuttle is a multi-purpose transport used in the imperial starfleet. Difficulty level moderate. The model is 4. The metal earth star wars models are amazingly detailed etched models that are fun and satisfying to assemble. 5×4 inches when assembled. The well-armed vessel has two forward-facing double laser cannons, two wing-mounted double cannons, and a rear-facing double laser cannon. When landing, the wings fold in, shrinking the vessel’s silhouette. 25×2. The empire pressed the shuttle into service for both cargo ferrying and passenger duty.

 

STAR WARS Battle of Hoth Action Scene Model Kit Skill Level 2 - Measures over 7″ (20cm) high, 17″ (45cm) long and 14″ (37cm) wide in landing mode. Features a rotating cockpit and wings, opening side hatches with hidden guns and missiles, 2 rotating dual shooters, cargo hold. Weapons include special blaster pistol for boba fett, blaster pistol for bespin guard and a blaster rifle for the stormtrooper. Recreate classic scenes from star wars episode v the empire strikes back. Boba fett and bespin guard minifigures are unique to this set.

 

Star Wars First Order Special Forces TIE Fighter Build and Play SnapTite Model Kit - Detailed, lighted cockpit includes a moveable hatch that opens and closes. Final assembled dimensions 5-1/8″l x 4″w x 6-3/4″h. First ever star wars model kit with battle action lights and sound. Includes 15 pieces and 3 lr44 batteries. Easy snap-together construction is rugged and will withstand a ton of play.

 

Revell Star Wars Snowspeeder Snaptite Model Kit - It is a modified t-47 airspeeder that was built by the incom corporation. The modifications made to the snowspeeder by the rebels included additional technical equipment to prevent the power plant from immediately freezing up. Always study the assembly drawings included in the packaging before beginning. Want to make a full star wars scene or diorama don’t miss the revell snaptite® star wars®at-at model kit what’s in the box 28 pre-decorated, snap together parts and fully detailed instructions. Strong cables that were originally designed for towing heavy loads and were used to good effect against the at-ats are fired by harpoon guns. This kit includes a movable laser canon and cockpit cover to show two figures. Product is intended for ages 8 and up. Join the world of model building there’s nothing quite like the satisfaction of building a model. If necessary, the pilot, who sits back-to back with the gunner in the cockpit, can take over complete control of the weapons in addition to the navigation. Model building is a great way to develop learning skills and increase dexterity. This kit may be snapped together, but for extra stability, you may want to cement or glue the parts as well. Helpful hints for building your snowspeeder is a level 1 kit, it’s perfect for anyone new to model kit building, as well as experienced builders. Trimming to remove extra plastic and filing to smooth before part assembly is suggested. Experience the fun and satisfaction of building your own iconic star wars snowspeeder with this revell snaptite model kit. The snaptite snowspeeder is sure to please kids, hobbyists, and star wars fans. No glue or paint needed just snap the pre-decorated pieces together and have a real life star wars replica in no time, complete with full authentic details. As one of the most widely used types of spacecraft in the galaxy, the t-47 is found in nearly every industrialized world. But did you know that studies show that building a model can help develop coordination, improve dexterity, and advance reading comprehension skills plus, it’s a great way to inspire creativity whether you’re new to the hobby, an experienced builder, or just looking for a project to share with a child or grandchild, it’s time to discover the thrill in being able to say, “i made that” the story behind the model the snowspeeder was used in the battle of the ice planet hoth in order to hold the approaching at-ats at bay. Each plastic part is identified by a part number. With afterburner, it reaches a speed of a good 110km/h, but it is not capable of space flight and is therefore of limited application. Incredible detailing gives you a model you’ll be proud to show off. Thanks to their high speeds, the snowspeeders are difficult to catch.

 

Star Wars Episode I Flying Action Model Rocket - Requires launch system, engines, wadding, igniters, glue, batteries none of which are included. For ages 10+ with adult supervision. Requires some assembly for flight. Trade federation battleship rocket flies up to 200 feet. Includes star wars trade fderation batteship rocket, display stand, flight proble components.

 

STAR WARS Encounter with Yoda on Dagobah Action Scene Model Skill 2 - Glue required for assembly paint recommended includes 29 parts. Free inside star wars shadows of the empire mini comic. Free inside star wars shadows of the empire mini comic glue required for assembly paint recommended includes 29 parts skill level 2.

 

Star Wars Imperial Tie Fighters Model Kit AMT ERTL - Imperial tie fighters. Star wars model kit. Skill level 2.

 

Star Wars – 1/144 Plastic Model Kit: Slave I (Jango Fett Ver.) [JAPAN] - This is a fine molds 1/144 scale assembly and painting required plastic model kit of jango fett’s customized slave i from the motion picture series star wars. Finished model approximately 5″ high and 5. Model kit features contains 116 parts and 1 decal for one slave i jango fett’s customized version. Each to-scale piece painstakingly recreated to precisely reflect actual size. 25″ wide. Parts created to facilitate ease of assembly.

 

Metal Earth 3D Model Kits Star Wars Set of 3 Millennium Falcon – R2-D2 – X-Wing Starfighter - 38″ x 2. Needle nose pliers are helpful for assembly. X-wing starfighter dimensions 4. R2-d2 dimensions 2. 05″ when assembled. 20″ x 1. 75″ x 4. 75″ x 1. 01″ x 3. 83″ x 2. 75″ per kit. Millennium falcon dimensions 2. 38″ when assembled. 97″ x 1. Package size measures approximately 6. 81″ when assembled.

 

4pc/set with 3.5″/9cm Size New Animation Minions Cos Star Wars 3D-Eyes Action Figures Toys Soft Plastic Stormtrooper, Darth Vader, Darth Maul, Obi-Wan Collectible Model Gift - Cosplay minions figures star warsdarth vader, darth maul, stormtrooper, obi-wan (no weapons or lightsabers). Sold in 4pcs, figure size 7-9cm or 3-35″ tall for different characters. Collectible high quality material action figures. Ships from amazon warehouse. Material soft plastic, packaging opp bag (no box).

 

3D Eye Minion Toys 4pcs/lot Minions Cosplay Star War Model 8cm Action Figure Toys - Material plastic  pvc 3d eye minion toys cosplay star war model 4pcs/lot minions, darth maul, darth vader, stromtrooper, jedi knight age over 3 years gender unisex. One set minion toys 4 pcs cos star war suit size 8 cm.

 

AMT Ertl Star Wars Cantina Action Scene Model Kit 8205 - Display stand. Amt ertl star wars cantina action scene model kit 8205. Assembled measures 4″ x 9″. 10 seconds of ship sound effects (ex a flyby, its turbo lasers, and the failed hyper-drive jump to light speed). 3 led lights illuminate the engines on the back of the ship.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.