Coolest 24 Blade 350 Qxes

 

Blade 350 QX Skin Jinx: Green and Yellow - Bearing material stainless steel 440c, ball material ceramic si3n4, abec#1/isop0. Blade 350 qx skin jinx green and yellow. Kit components qty8sr2-5c-yzz af2 (125x312x140).

 

Blade 350 QX Skin Jinx: Red and Yellow - Blade 350 qx skin jinx red and yellow. Microheli aluminum main led case (for mh frame blade 350 qx series).

 

3-Pack of Lectron Pro 11.1 volt – 2700mAh 35C Lipos with EC3 Connectors for Blade 350 QX - 5 amps continuous discharge. This 3-pack of 3 cell 2700mah 35c lipos are the same size as a typical 2200mah lipo but will provide you with nearly 25% more flight time it includes an ec3 connector on the discharge leads, perfect for the blade 350 qx and 450, parkzone t-28 trojan, f-27q stryker, extra 300, spitfire, and f4u-a1 corsair, plus tons more models it is rated and has been tested at 94. .

 

Microheli Aluminum Main Led Case (for MH Frame BLADE 350 QX series) - Microheli aluminum main led case (for mh frame blade 350 qx series). Fits blade 350 qx.

 

Rakon Blade 350 QX/2/3 RKH Canopy (Unpainted) – 350QX-C0101 - Included, rkh canopy (1set). Description- option parts for rkh’s cnc advanced upgrade kit (sku 350qx980, 981). 2., Optimized for weight and durability. Rakon blade 350 qx/2/3 rkh canopy (unpainted), 350qx-c0101 1. .

 

3-Pack of Lectron Pro 11.1 volt – 3000mAh 30C Upgrade Lipo with EC3 Connector for the Blade 350 QX - Provides 35% more flight time than the stock battery. Includes an ec3 connector on the discharge leads. Same size and weight as a typical 2200mah lipo. Perfect for the blade 350 qx and 450, parkzone t-28 trojan, f-27q stryker, extra 300, spitfire, and f4u-a1 corsair.

 

Rakon Blade 350 QX/2/3 LEDs (Blue) – 350QXLD-B - . 2. Rakon blade 350 qx/2/3 leds (blue), 350qxld-b 1. Included 1 x leds. Description- compatible and replacement for stock leds, blade 350 qx/2/3.

 

Rakon Blade 350 QX/2/3/Traxxas Aton CNC Delrin Leg Set – 350QX737 - 93(g) = 0. 46(oz). – spare parts for rkh’s cnc advanced upgrade kit (sku aton980). 2., Weight 12. Rakon blade 350 qx/2/3/traxxas aton cnc delrin leg set, 350qx737 1. Description- option parts for rkh’s cnc advanced upgrade kit (sku 350qx980, 981, 982). Included 4 x cnc delrin leg with hardware.

 

SummitLink Blade 350 QX Landing Gear Set Red - Set of 2 landing gear for blade 350qx. Set of 2 landing gear for blade 350qx. Protect props and motors in crashes. Added safty for flying around people or objects. Set of 4 snap on/off prop guards for blade 350 qx 1 qx 2 qx 3.

 

Rakon Blade 350 QX/2/3 CNC 3K Pure Carbon Fiber Landing Skids – 350QX723-CF - Very strong and light weight. 6mm shaft for carbon fiber or apc style props with 6mm hub or ring kit. Each adapter package labeled for correct motor installation. Included 2 cw and 2 ccw prop adapters and spinner nuts, washers, and screws. Cnc machined from billet aluminum.

 

SummitLink® Blade 350 QX 1 QX 2 QX 3 CNC Aluminum Self-Tightening Propeller Adapter for DJI Phantom Prop - These adapters are color coded for easy and correct installation. They fit on stock blh7802 of 350 qx that allow you to install all dji phantom props onto your 350 qx for better performance. Cnc aluminum propeller self-tightening adapters for blade 350 qx series. They fit on blade 350 qx 1 qx 2 and blade 350 qx3.

 

Microheli Precision CNC AL Prop Adapter w/ Nut Cap set (BLUE/PURPLE) – BLADE 350 QX - Features customizable foam made up of ½ inch squares so you can choose your cavity sizes. External dimensions 22 1/2 ” x 16 1/2″ x 8 1/2″. Microheli precision cnc al prop adapter w/ nut cap set (blue/purple), blade 350 qx. Super-tough weather-proof outer shell made from abs polymer. Internal dimensions 19 1/2″ x 13 1/2″ x 8″.

 

Premium Aluminum-Frame Carrying Case for Blade 350 QX and DJI Phantom Quadcopters - Features customizable foam made up of ½ inch squares so you can choose your cavity sizes. Features two layers of customizable diy foam, so you can create the perfect cutouts for your specific needs. Designed to fit blade 350 qx and dji phantom models with standard-size landing gear. Also a great size for tons of other uses, large chargers and power supplies, game/action figures, camera equipment and much more. Provides plenty of space for your quad, tx, batteries, tools, parts and more.

 

Blade 350 QX Body Set w/ Hardware BLH7811 350QX - Blade 350 qx body set w/ hardware. Fits blade 350 qx.

 

Rakon Blade 350 QX/2/3 RKH Canopy (Red) – 350QX-C0102 - Rakon blade 350 qx/2/3 rkh canopy (red), 350qx-c0102 1., Optimized for weight and durability. 2. Description- option parts for rkh’s cnc advanced upgrade kit (sku 350qx980, 981). Included, rkh canopy (1set).

 

SummitLink Blade 350 QX 1 QX 2 QX 3 Snap on/off Prop Guards 2 Red 2 White Tool Free Quick Mount Quick Release Disconnect - Snap on tool free quick mount and dismount. Protect props and motors in crashes. Set of 4 snap on/off prop guards for blade 350 qx 1 qx 2 qx 3. 2 red and 2 white for better orientation recognition. Added safty for flying around people or objects.

 

E-Flite Blade 350 QX / 350 QX2 CNC Machined Prop Nut Set. CW and CCW Threads - Simply use any small allen wrench or screwdriver to securely fasten the nut. Each propeller will be self tightening while the motor is powered. Installation hand tighten each prop nut onto the propeller shaft, then insert a small allen or screwdriver into the hole and securely tighten. No special tools required. This set includes 2 right hand thread and 2 left hand thread prop nuts. Please refer to pictures for more details. 6g dimensions thread 6mm. Our e-flite blade 350 qx / 350 qx2 prop nuts are cnc machined from billet aluminum. These spinner / prop nuts are light weight and a perfect match for our blade 350 qx / 350 qx2 prop adapter set there is the traditional hole drilled through the tip of each spinner nut for easy installation. (Left hand thread prop nuts have a groove on the bottom surface. ) Included 4, e-flite blade 350 qx / 350 qx2 prop nuts (2 right hand thread / 2 left hand thread) weight (single prop nut) 2.

 

Rakon CNC 3K Pure Carbon Fiber Landing Skids (for Tall Landing Gear) – Blade 350 QX/2/3/Chroma - Description- spare part for rkh’s cnc al tall landing gear set (sku 350qx729) and rkh’s cnc advanced upgrade kit 03 (sku 350qx982), blade 350 qx/2/3.  .   1., Spare part for rkh’s cnc advanced upgrade kit (sku chroma981), blade chroma., Optimized for weight and durability. Included 2 x cnc 3k pure carbon fiber landing skids.   2.

 

Microheli CNC Aluminum/Carbon Fiber Quadcopter Frame Kit (GOLD) – BLADE 350 QX - As always, we strive to offer our customers the best integrated solutions and best-in-class service. Please check the product instruction before you use it. We supplies high-quality products, provides specialty technical support and delivers service guarantees to ensure customer satisfaction with these competitive advantages, we not only continue to broaden product categories to lead in highly competitive markets, but also succeed to strengthen our partnerships with various channels in emerging markets. Due to the ultra-light weight of this carbon fiber propeller,you will enjoy much better operating. Cnc aluminum/carbon fiber quadcopter frame kit (gold), blade 350 qx.

 

E-Flite Blade 350 QX / 350 QX2 CNC Machined Prop Adapter Set. CW and CCW Threads. - Very strong and light weight. Included 2 cw and 2 ccw prop adapters with hex nuts, washers, and screws. Each adapter package labeled for correct motor installation. 6mm shaft for carbon fiber or apc style props with 6mm hub or ring kit. Cnc machined from billet aluminum.

 

Microheli Carbon Fiber Upper Main Frame (for MH Frame BLADE 350 QX series) - The carbon fiber upper main frame is optimized for rigidity & durability of the microheli frame series mh-35qx005qk, mh-35qx105qk, mh-35qx205qk, mh-35qx305qk. .

 

Rakon CNC Delrin LEDs Cover – Blade 350 QX/2/3/Chroma - Rakon blade 350 qx/2/3/chroma/traxxas aton cnc delrin leds cover, chroma604 1. 077(oz). 19(g) = 0., Weight 2. Description- option part for rkh’s cnc advanced upgrade kit, blade 350 qx/2/3/chroma. 2. – m2. 5x6mm button head screw (2pcs). Package included, cnc delrin leds cover (1pc).

 

Blade 350 QX Body Set w/ Hardware BLH7811 350QX - Blade 350 qx body set w/ hardware. Fits blade 350 qx.

 

Carrying Case for Blade 350 QX and DJI Phantom Quadcopters - If you are using extended landing gear like that found on the blade 350 qx3 ap combo (approximate total model height of 11″”), you will need to detach the landing gear for the quad to fit in this case. 5″”). The outer shell is made from a super-tough abs polymer, and our customizable diy foam lets you modify the internal space to fit your exact needs, with plenty of room for your quad, transmitter, batteries, charger, tools, spare parts and more. This durable case provides the ultimate in protection and convenience for your blade 350 qx, dji phantom or other similar size multirotor. External dimensions 22 1/2 “” x 16 1/2″” x 8 1/2″”internal dimensions 19 1/2″” x 13 1/2″” x 8″” note this case is designed to fit blade 350 qx and dji phantom models with standard size landing gear (approximate total model height of 7.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.