ST Racing ST7460B CNC Machined Aluminum Motor Mount for Traxxas Slash 4×4 Rally
- Â the size of this aluminum motor mount also adds a bit more weight to the rear of the truck for more rear traction and also helps pulls more heat from the motor. Increase the drivetrain durability and improve the precision and alignment of your traxxas lcg slash 4×4 and rally’s transmission with this great looking cnc machined aluminum motor mount. Â No modifications needed, direct drop in for your traxxas vehicle.
RPM Traxxas Slash 4×4 Front Bumper and Skid Plate, Blue
- With an rpm impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. Sadly, that was not the case. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. Once the race is over, simply reinstall the bumper and full bash protection is once again available our traxxas slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. We made it a three-piece design to give the slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. When traxxas first announced the 4×4 version of the slash, rpm customers immediately started asking us if our 2wd version parts would fit it. Our three-piece front bumper / skid plate design for the traxxas 4×4 is simple, yet strong, effective and highly attractive. Since then, we’ve been working hard to make all of those rpm parts 2wd owners love, fit on the slash 4×4 version. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing.
Boom Racing #BR271099 Steel Heavy Duty Helical Spiral Differential Ring & Pinion Gear (37T/13T) for All Traxxas 4WD 4X4 for Traxxas Slash 4X4 by Boom Racing
- Expediated shipping is shipped by dhl or fedex arrives in about than 2-5 days major cities will receive orders earlier. Fits perfectly for e-maxx front/rear diffs, the e-revo front/rear diffs, the rally vxl front diff, the revo 33 front/rear diffs, the slash 4×4 front diff, the slayer pro 4×4 front/rear diffs, the summit 4×4 front/rear diffs, the telluride 4×4 front diff, the t-maxx 33 front/rear diffs, and the xo-1 front diff  gear one diameter (inter) 65mm diameter(outer) 37mm thickness 4mm more details below. Takes 7 to 15 business days by standard airmail shipping 80% of packages arrive within 10 business days most packages ship within 12 hours please allow 1 extra day if order is placed during the weekend. Lightweight upgrade instantly enhances overall performance in handling and durability.
Traxxas 6852X 6852X Driveshaft Assembly Rear Slash 4×4
- This product is made from high quality materials and designed for long-lasting performance. Use traxxas stock and hop-up replacement parts to get the most out of your traxxas rtr vehicles. Fits right rear or left rear slash 4×4 and stampede 4×4 models. Direct oem replacement for stock driveshaft. Driveshaft is fully assembled and ready to install with included screw pin.
BQLZR Dark Blue SLA016 Aluminum Alloy Wheel Hub Hex 12x7mm Mount and Pin Upgrade Parts for TRAXXAS SLASH 4X4 & HQ727 Short Truck RC Car Pack of 4
- Aluminum alloy material,high protection and long durability 2. 47×0. Note the color of the item may vary slightly due to photography and your own computer part name12x7mm wheel hex mount & pin part no. Package include 4 x wheel hex mount(12x7mm) 4 x pins. 55” width12mm/0. 28” wheel hex mount size 12x7mm/0. Sla016 material aluminum alloy colordark blue partupgrade parts length14mm/0. Sealing performance, attractive appearance, corrosion resistance 3. 28”(wxt) total weight 11g application 1. Suitable for traxxas slash 4×4 & hq727 short truck rc car. 47” thickness7mm/0.
2-Pack of Lectron Pro 7.4 volt – 5200mAh 50C Lipo Battery Pack for the Traxxas Slash and Slash 4X4 models, E-Maxx Brushless Edition, E-Revo Brushless Edition, and Spartan with Traxxas-type Connector
- Includes a traxxas connector on the discharge leads. Perfect for 1/10 scale cars, trucks, and buggies. Features a huge capacity for extended run times and a gigantic c rating so you’ll have all the power you’ll ever need. Great choice for the traxxas slash and slash 4×4 models, e-maxx brushless edition, e-revo brushless edition, and spartan. High-end performance and reliability at an affordable price.
Traxxas 5827X Battery Hold Down, Slash
- Fits 1/10 scale 2wd slash models, both standard and lcg-chassis and standard-chassis 4wd slashes (does not fit lcg 4×4 chassis). Allows for installation of taller, multi-cell batteries. Includes battery post, foam spacer, and angled body clip. Extended battery hold down and hold down retainer. Use traxxas stock and hop-up replacement parts to get the most out of your traxxas rtr vehicles.
Muddy Monster Body for 1/10 Traxxas Slash Truck Slayer Shell Cover Baja 6811
- This is the replacement body with painting and decals for the traxxas slash 2wd, slash 4×4, and slayer. You get exactly the same body shown in the picture. Traxxas truck muddy body for 1/10 slash 4×4 vxl 2wd slayer shell cover baja 6811. It is exactly the same specs as the stock body body already painted, holes already drilled, it is ready to be mounted to your car.
Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue
- Complete low center-of-gravity chassis conversion kit for 2wd slash models. Includes chassis, lower chassis, nerf bars (2), battery hold-down front and rear battery retainers, and front shock springs. Genuine traxxas quality and precision. Low center of gravity enhances handling and increases cornering speed. Over 45% lower battery position. Lowers chassis one inch (33mm/13in) over 45% lower battery position. Lowers chassis one inch (33mm/13in). Complete kit, no additional parts required.
RPM 70502 Spare Tire Carrier for Traxxas Slash, Black
- Are you looking to bolt on a spare tire to your favorite short course truck but prefer the look of a single spare tire versus the appeal of our dual spare tire carrier (rpm #70502) our single spare tire carrier is an excellent option it is a simple add-on that allows you to bolt on one functional spare tire to the back of your truck, perfectly mimicking many popular full-scale off-road desert trucks running in some of the toughest desert conditions out there. .
Traxxas Slash 2WD BRUSHED OR BRUSHLESS MODEL Spur Gears, Pinions & Slipper Clutch FROM A BRAND NEW RTR SLASH 2WD 58024,58034,5807
- Brand new slash 1/10 parts taken from a never used rtr vehicle. Parts included are slipper pressure plate & hub (part # 5556) 1 ball bearings, 5x11x4mm (part # 5116) clutch rebuild kit (part # 5552x) spur gear, 90t 48p (part # 4690). Spur gear, 86t 48p (part # 4686) 48p 23t pinion gear w/set screw, steel (part # 2423) 48p 16t pinion gear w/set screw (part # 2416) dust cover/rubber plug w/screws (part # 3792) 3 back plate screws, hex drive cap head (part # 2554).
RPM Adjustable Height Body Mounts Traxxas Slash 4×4, Black
- Designed to increase durability. Rpm body mounts can be mounted in either the front or rear location on the traxxas slash 4×4 & rally. Proudly made in the usa. Replaces weaker stock components. They can only be used on the rear position on the stampede 4×4.
BQLZR Red SLA007 Aluminum Alloy Front & Rear Suspension Arms Upgrade Parts for TRAXXAS SLASH 4X4 & HQ727 Short Truck RC Car Pack of 2
- Suitable for traxxas slash 4×4 & hq727 short truck rc car. Package include 2 x front & rear suspension arms 4 x e-clips 2 x pins. 77” thickness6. 5mm/3. 94×1. 94” width45mm/1. Sla007 material aluminum alloy colorred partupgrade parts length100mm/3. 26”(lxwxt) total weight 58g application 1. 77×0. Sealing performance, attractive appearance, corrosion resistance 3. 5mm/0. Note the color of the item may vary slightly due to photography and your own computer part namefront & rear suspension arms part no. 26” total size100x45x6. Aluminum alloy material,high protection and long durability 2.
SkyQ Front Rear RC Shock Absorber Spring Damper for Traxxas Slash 4×4 Upgrade Dark Blue 4pcs
- Rear shock absorber length is approx 115 mm. Made of high quality aluminum ,very durable and easy to replace. Front shock absorber length is approx 100 mm. Upgrading your rc cars’ shocks. Lightweight upgrade instantly enhances overall performance in handling and durability.
Traxxas 1/10 Slash 4X4 Brushless Short Course Truck (Platinum Edition)
- Extreme brushless vxl power for 60+ mph speeds, integrated low-voltage protection, and waterproof electronics. Blue-anodized 6061-t6 aluminum c-hubs, steering blocks, rear hub carriers. Choose your own transmitter, receiver, battery, and charger (sold separately) clear polycarbonate body allows custom paintwork. Hard-anodized and ptfe-coated aluminum gtr shocks with titanium nitride shafts. Rigid, low center of gravity chassis. Sealed, silicone filled center differential. Adjustable front and rear swaybars. Blue-anodized 6061-t6 aluminum c-hubs, steering blocks, rear hub carriers, and axle nuts. Rigid, lcg chassis with adjustable front and rear sway bars and sealed, silicone filled center differential. Hard-anodized and ptfe-coated aluminum gtr shocks with titanium nitride-coated shafts.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
