Secraft Aluminum Servo Arm V1 1inch – Futaba/Graupner MKS Red
- Secraft aluminum servo arm v1 1inch, futaba/graupner mks red. Include ipad mini station kit, red lever 25mm (1 pair).
Secraft Transmitter Tray Double Harness Red V1
- It makes using it as comfortable as possible, even for many hours. Material aluminium 6061-t6 (anodized) four-point length regulation lets you adjust the strap exactly to your body. Tx-tray sold separately the al 6061 plate size width, 175mm height, 120mm weight 340g. The strap is 37mm wide.
SECRAFT RC transmitter TX-Tray for DJI Phantom3 RED
- Compatible with phantom3 transmitter. Made of cnc aluminum. Easy to use and comfortable to wear.
Secraft Aluminum Servo Arm V1 1inch – HITEC Blue M2
- 0inch ( 25. 0g 1 per package bolt is not included installation guide, follow aircraft manufactures recommendation for servo control horn set up, locktite all servo screws- install ball link on bottom of servo arm (where possible), keep all linkage tight, servo arms longer than what is recommended can cause binding and damage to aircraft. 4mm) fixing screw bolt is m2 weight 2. Hitec24t (blue) length 1.
Secraft Transmitter Tray V1 Black (S) for JR-Spektrum-Graupner Radios
- For jr 9x, 10x, 11x, xg7. Are you looking for a transmitter tray that really works for any type of transmitter this design is the best we have ever seen. Your transmitter simply slides in and is held securely without any fancy or complicated fasteners. Spektrum dx5, dx6, dx7, dx8. Graupner mx-12, mx-20 and mz-24.
Secraft Aluminum Servo Arm V1 15mm JR Gold
- Secraft aluminum servo arm v1 15mm jr gold. The strap is 37mm wide it makes using it as comfortable as possible, even for many hours.
Secraft 4mm Wing Bolts (pair) Red
- Secraft ball link 2mm (brass) (qty 10). Available in most sizes 55mm-85mm mobile phone. Secraft 4mm wing bolts (pair) red. Compatible with tx-tray.
Secraft Full OffSet Aluminum Servo arm 2.5 3mm JR Spektrum 23T Spline
- In fact they should go on a about a 1/3 of the way with light pressure and use the screw to pull them down the rest of the way. Note servo arms should fit snug, and not just slip onto the output shaft. Remember oil in the servo screw hole will not let the loctite work properly. We suggest the arms will be installed outside the aircraft and on a stable flat surface. Full arms are measured from the outside hole to the outside hole. All arms are heavy duty anodized aluminum and tapped for 4-40 or m3 thread. If need be, place a drop of light oil in the servo arm hole being very careful not to get any oil in the servo screw hole to help get the arm in place. We do this because we are all after the tightest linkage and if there is any play in the spline fit it will only get worse. Secraft double-loc servo arms are designed to clam around and also make up for any inconsistencies in the servo output shafts.
Secraft iPad Mini Station for Wifi Repeater/DJI/TX Tray V1
- The secraft ipad mini station for wifi repeater is design to hold the ipad mini tablet and the wifi repeater together with a radio and transmitter tray for fpv applications. It can be used with secraft transmitter tray v1 and transmitter tray for dji phantom 2. .
Secraft Aluminum Turnbuckle 70mm Long 3mm Thread (2pk)
- Each pushrod features a m3 right-hand thread on one side and a m3 left-hand thread on the other (turnbuckle). A machined hole in the middle allows you to make very fine length adjustments without removing the linkage from the servo arm or control horn. With their size and weight, giant-scale aircraft place higher demands on their control systems. Pushrod turnbuckles offer the ultimate in strength and security with the added bonus of ease of adjustability and ultra-light weight. This is especially true for giant-scale aerobatic airplanes.
Secraft Transmitter Tray V1 – Large
- 40mm length with offset for rudder applications for futaba, red color. Secraft transmitter tray v1, large.
Secraft Pull-Pull Wire – Silver (1mm dia) (3meters long)
- This system makes rudder cable hook-ups so much easier no guess work on the security of this system with the double crimps. Secraft pull-pull wire, silver (1mm dia) (3meters long).
SECRAFT RC Transmitter Tx-tray V1 (L) RED
- Made of cnc aluminum. Compatible with exiding 180mm transmitter. Easy to use and comfortable to wear.
Secraft Aluminum R/C Transmitter Tray Futaba DJI HITec Large BLACK FPV Mount, Hand Rests, Harness.
- Transmitter tray is suitable for futabat8fg, 10cg, 12fg, t12z, 14mz ,18mz,14sg hitec aurora9. Bundled package deal includes the secraft transmitter tray (l) in black, fpv mount, hand rest in black and double neckstrap black.
Secraft Aluminum Servo Arm V1 15mm Futaba/Graupner MKS Red
- For jr 9x, 10x, 11x, xg7. Are you looking for a transmitter tray that really works for any type of transmitter this design is the best we have ever seen. Your transmitter simply slides in and is held securely without any fancy or complicated fasteners. Secraft aluminum servo arm v1 15mm futaba/graupner mks red. Secraft wire tensioner, silver.
Secraft Wire Tensioner – Silver
- Your transmitter simply slides in and is held securely without any fancy or complicated fasteners. For jr 9x, 10x, 11x, xg7. Spektrum dx5, dx6, dx7, dx8. Are you looking for a transmitter tray that really works for any type of transmitter this design is the best we have ever seen. Secraft wire tensioner, silver.
Secraft V4M3 Blue tip Transmitter stick ends Futaba, Airtronics
- Material anodized aluminum length 40mm diameter 10mm futaba and atx 2 per package these is strong and lightweight. It’s all adjustable via a allen round head screw on the top. Or any 3mm stud great addition for the tray systems that secraft provides these sticks are made to work 2 ways #1 the colored ends can be made to rotate in your fingers or #2 they can be turned around and be solid with the stick body. These fit the futaba transmitters as well as airtronics. Perfect for the pinch flier 3mm thread on the end that screws into the transmitter stick stud.
Secraft Transmitter Tray V1 Small Spektrum Hitec RED
- Neck strap sold separately. Are you looking for a transmitter tray that really works for any type of transmitter this design is the best we have ever seen. This system works well for both “thumb” pilots and the “finger and thumb” guys. Material aluminium 6061-t6 (anodized) s type jr 9x, 10x, 11x, xg7 spektrum dx5, dx6, dx8 graupner mx-12, mx-20 and mz-24 color (blue & ti-silver), (red & ti-silver) includes easy lock for tx-tray v1 total weight 290g all of your switches are easily accessible and the transmitter’s display is still easily viewed. Your transmitter simply slides in and is held securely without any fancy or complicated fasteners. Use for any spektrum, jr, hitec or futaba radios.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
