Top 23 Zenmuses

 

DJI Zenmuse X5 Camera and 3-Axis Gimbal Without Lens  Vibration Absorbing Board

DJI Zenmuse X5 Camera and 3-Axis Gimbal (Without Lens) + Vibration Absorbing Board

DJI Zenmuse X5 Camera and 3-Axis Gimbal (Without Lens) + Vibration Absorbing Board - Dci 4k (4096 x 2160) video capture. Micro four thirds sensor with mft mount. Over 12 stops of dynamic range. Records to microsd cards. 16mp still photos.

 

DJI Drone Accessory CPBX000087 Zenmuse X5 Part 2 Vibration Absorbing Boards Retail

DJI Drone Accessory CP.BX.000087 Zenmuse X5 Part 2 Vibration Absorbing Boards Retail

DJI Drone Accessory CP.BX.000087 Zenmuse X5 Part 2 Vibration Absorbing Boards Retail - Dji drone accessory cpbx000087 zenmuse x5 part 2 vibration absorbing boards retail. 4 x medium damping rubber. 4 x hard damping rubber.

 

DJI Zenmuse H3 2d Rubber Dampeners Part No 15

DJI Zenmuse H3 2d Rubber Dampeners Part No. 15

DJI Zenmuse H3 2d Rubber Dampeners Part No. 15 - . Includes the same 3 sets that was originally packaged with your gimbal. Replacement set of dampening rubbers for the zenmuse h3-2d.

 

DJI Zenmuse H3-3D Mounting Adapter for Flame Wheel F450

DJI Zenmuse H3-3D Mounting Adapter for Flame Wheel F450

DJI Zenmuse H3-3D Mounting Adapter for Flame Wheel F450 - You can now mount a 3d zenmuse on your flame wheel f450. This adapter will give the proper spacing required to mount the gimbal.

 

Accessory Kit for Zenmuse X3 Inspire 1 Variant  Zenumse X5  Zenmuse X5R Includes DJI Osmo Handle Kit  DJI Osmo Carry Case  Additional Osmo Battery and Charger  MORE

Accessory Kit for Zenmuse X3 (Inspire 1 Variant) + Zenumse X5 + Zenmuse X5R. Includes DJI Osmo Handle Kit + DJI Osmo Carry Case + Additional Osmo Battery and Charger + MORE

Accessory Kit for Zenmuse X3 (Inspire 1 Variant) + Zenumse X5 + Zenmuse X5R. Includes DJI Osmo Handle Kit + DJI Osmo Carry Case + Additional Osmo Battery and Charger + MORE - Detachable phone holder. Handle with camera and gimbal controls. Note zenmuse x5 cameras require an adapter for use with osmo adapter is not included. Also works with inspire 1’s zenmuse x3, x5, x5r. Compatible with osmo gimbal and camera.

 

DJI Inspire 1 Meditation Part Zenmuse X3

DJI Inspire 1 Meditation Part Zenmuse X3

DJI Inspire 1 Meditation Part Zenmuse X3 - Dji zenmuse x3. 1/23 inches cmos. Meditation part zenmuse x3. 1200 w. [email protected]@60fps.

 

DJI OSMO Z-AXIS STABILIZER for Zenmuse X3 gimbal and camera

DJI OSMO Z-AXIS STABILIZER for Zenmuse X3 gimbal and camera

DJI OSMO Z-AXIS STABILIZER for Zenmuse X3 gimbal and camera - Dji zenmuse h4-3d part 3 damping rubber., Uv mrc filter reduces the level of ultraviolet light and protects the lens. Dji drone cpbx000076 zenmuse x5 inspire 1 camera lens 4k 30fps 4096×2160 retail., Polarizing mrc filter helps to reduce glare and improve color saturation., Nd variable filter is adjustable from nd2 to nd400 nd2 will block out 1 stop of light, nd4 2 stop, nd8 3 stop, nd16 4 stop, nd32 5 stop, nd64 6 stop, nd128 7 stop, nd256 8 stop, nd400 9 stop.

 

DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO334 Phantom 2 CPZM000061 With 32GB MicroSDHC Class10 UHS-1 Memory Card

DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/3+/4 (Phantom 2) CP.ZM.000061 With 32GB MicroSDHC Class10 UHS-1 Memory Card

DJI Zenmuse H3-3D 3-Axis Gimbal for GoPro HERO3/3+/4 (Phantom 2) CP.ZM.000061 With 32GB MicroSDHC Class10 UHS-1 Memory Card - Controlled rotation range tilt axis control -130 to +45 degree. Maximum controlled rotation speed tilt axis ±130 degree/s. Controlled angle accuracy tilt/roll ±002 degree yaw ±003 degree. With transcend 32gb microsdhc class10 uhs-1 memory card with adapter 45 mb/s (ts32gusdu1e). Gopro camera not included.

 

Drone Fans Inspire 1 X3 Gimbal Flat Cable Gimbal Protector Protection Flat Wire Repairing Accessory for DJI Inspire 1 Zenmuse X3 Gimbal

Drone Fans Inspire 1 X3 Gimbal Flat Cable Gimbal Protector Protection Flat Wire Repairing Accessory for DJI Inspire 1 Zenmuse X3 Gimbal

Drone Fans Inspire 1 X3 Gimbal Flat Cable Gimbal Protector Protection Flat Wire Repairing Accessory for DJI Inspire 1 Zenmuse X3 Gimbal - Packing list 1x gimbal flat cable. 100% brand new and high quality. This flat cable is used for gimbal repairing if the original gimbal cable doesn’t work, especially after a crash. Suitable for dji inspire 1 zenmuse x3.

 

New Pitch Control Lever Kit for Dji Phantom Transmitter Ch7 Zenmuse Tarot Tilt Slide

New Pitch Control Lever Kit for Dji Phantom Transmitter Ch7 Zenmuse Tarot Tilt Slide

New Pitch Control Lever Kit for Dji Phantom Transmitter Ch7 Zenmuse Tarot Tilt Slide - Compatible with dji phantom 2 gopro hero3 zenmuse h3-3d 3-axis gimbal. Supplied with the screws needed to mount to the underside of the dji phantom 2, this plate is not supplied with the mounting dampening rubbers needed to connect to the h3-3d gimbal. Compatibility zenmuse z15-gh4 gcu (hd). For use with the dji zenmuse h3-3d gimbal due to the third axis motor needing additional clearance from the frame plates and the change in orientation of the mounting points on the h3-3d gimbal.

 

DJI Original Replacement Phantom 2 GoPro FPV Video USB Output Connection Cable for Zenmuse H3-3D 3-Axis Gimbal Spare Part NO56

DJI Original Replacement Phantom 2 GoPro FPV Video USB Output Connection Cable for Zenmuse H3-3D 3-Axis Gimbal Spare Part NO.56

DJI Original Replacement Phantom 2 GoPro FPV Video USB Output Connection Cable for Zenmuse H3-3D 3-Axis Gimbal Spare Part NO.56 - Wide range of tilt from -130-degress to +45-degrees. Firmware is easily upgraded using the pc/mac gimbal assistant software downloaded from dji. Low weight of just 59 oz. Compatible with phantom 2 and will work with other flight controllers with purchase of a separate gcu. A set of clover stickers will be also sent to you as gift.

 

DJI Zenmuse H4-3D Mounting Adapter for Flame Wheel 450 HexacopterPhantom 1 Quadcopter

DJI Zenmuse H4-3D Mounting Adapter for Flame Wheel 450 Hexacopter/Phantom 1 Quadcopter

DJI Zenmuse H4-3D Mounting Adapter for Flame Wheel 450 Hexacopter/Phantom 1 Quadcopter - Compatibility flame wheel 450 hexacopter/phantom 1 quadcopter. Zenmuse h3-3d 3-axis gimbal is included in this bundle for extreme camera stability and silky smooth video recording. New self-tightening propellers means extra security and no worrying about lost prop nuts when you remove the props for storage. Fly 25-28 minutes on a single charge using the included 5,200-mah lithium polymer (lipo) battery that’s easily removable and contains intelligent circuitry and a charge-remaining indicator built-in. Complete quad copter and remote transmitter, pre-tuned by the factory and ready in minutes just charge the included battery, attach the propellers and add 4 aa batteries to the remote and you’re flying.

 

DJI Inspire 2 Accessories ZENMUSE X5S Lens KitLens Excluded USA DEALER

DJI Inspire 2 Accessories ZENMUSE X5S (Lens Kit/Lens Excluded) USA DEALER

DJI Inspire 2 Accessories ZENMUSE X5S (Lens Kit/Lens Excluded) USA DEALER - 2k | f1. Camera body cap x1 3. Item descripition m4/3 | 5. Gimbal and camera x1 2. 7, f16 | cinemadng | prores | 4. Lens rear cap x1 the zenmuse x5s lens kit includes the original lens,balancing ring,lens cap,rear lens cap and lens hood. 2gbps max what’s in the box 1. Accessories for other supported lenses can be purchased separately.

 

DJI Original Lightbridge Part 10 Phantom 2 FPV Zenmuse H3-2D H3-3D Gimbal 24GHZ HD Video Transmitter Downlink System GoPro HDMI Cable

DJI Original Lightbridge Part 10 Phantom 2 FPV Zenmuse H3-2D H3-3D Gimbal 2.4GHZ HD Video Transmitter Downlink System GoPro HDMI Cable

DJI Original Lightbridge Part 10 Phantom 2 FPV Zenmuse H3-2D H3-3D Gimbal 2.4GHZ HD Video Transmitter Downlink System GoPro HDMI Cable - This dji lightbridge part 10 phantom 2 fpv zenmuse h3-2d h3-3d gimbal 2. . 4ghz hd video transmitter downlink system gopro hdmi cable is a ‘bare-wire’ hdmi cable for connecting the gopro to an air-end hd video transmitter such as the one built into the lightbridge downlink unit.

 

DJI Part 2 512GB SSD Solid State Drive for Zenmuse X5R Inspire 1 X5 RAW Camera with eDigitalUSA Cleaning Kit

DJI Part 2 512GB SSD Solid State Drive for Zenmuse X5R (Inspire 1 X5 RAW) Camera with eDigitalUSA Cleaning Kit

DJI Part 2 512GB SSD Solid State Drive for Zenmuse X5R (Inspire 1 X5 RAW) Camera with eDigitalUSA Cleaning Kit - Weight 33 g. Operating temperature 32°, 158° f (0°, 70° c), storage temperature -40°, 185° f (-40° to 85° c). Humidity 5% to 95%, non-condensing. Dimensions 84 mm × 38 mm × 65 mm. Inspire 1 raw ssd drive capacity 512 gb.

 

Darkhorse Zenmuse H3-3D 3-Axis Gimbal Damping Unit Upper Bracket Part 48 For DJI Phantom GoPro Hero3

Darkhorse Zenmuse H3-3D 3-Axis Gimbal Damping Unit (Upper Bracket) Part 48 For DJI Phantom GoPro Hero3

Darkhorse Zenmuse H3-3D 3-Axis Gimbal Damping Unit (Upper Bracket) Part 48 For DJI Phantom GoPro Hero3 - For use with the dji zenmuse h3-3d gimbal due to the third axis motor needing additional clearance from the frame plates and the change in orientation of the mounting points on the h3-3d gimbal. Brand dji. Supplied with the screws needed to mount to the underside of the dji phantom 2, this plate is not supplied with the mounting dampening rubbers needed to connect to the h3-3d gimbal. Compatible with dji phantom 2 gopro hero3 zenmuse h3-3d 3-axis gimbal.

 

DJI Part 3 SSD Reader for Zenmuse X5R Camera

DJI Part 3 SSD Reader for Zenmuse X5R Camera

DJI Part 3 SSD Reader for Zenmuse X5R Camera - The zenmuse x5r ssd reader is used to export data from the x5r ssd. Complete quad copter and remote transmitter, pre-tuned by the factory and ready in minutes just charge the included battery, attach the propellers and add 4 aa batteries to the remote and you’re flying. Fly 25-28 minutes on a single charge using the included 5,200-mah lithium polymer (lipo) battery that’s easily removable and contains intelligent circuitry and a charge-remaining indicator built-in. Compatibility flame wheel 450 hexacopter/phantom 1 quadcopter. New self-tightening propellers means extra security and no worrying about lost prop nuts when you remove the props for storage.

 

DJI Phantom 2 Quadcopter with Zenmuse H3-3D 3-Axis Gimbal for GoPro Video Camera

DJI Phantom 2 Quadcopter with Zenmuse H3-3D 3-Axis Gimbal for GoPro Video Camera

DJI Phantom 2 Quadcopter with Zenmuse H3-3D 3-Axis Gimbal for GoPro Video Camera - Fun flying by itself or even better with a gopro to record the action tested with hero3 and hero3+ models, sold separately note wi-fi streaming from a camera is not possible because it may interfere with the phantom’s remote control. Zenmuse h3-3d 3-axis gimbal is included in this bundle for extreme camera stability and silky smooth video recording. New self-tightening propellers means extra security and no worrying about lost prop nuts when you remove the props for storage. Fly 25-28 minutes on a single charge using the included 5,200-mah lithium polymer (lipo) battery that’s easily removable and contains intelligent circuitry and a charge-remaining indicator built-in. Complete quad copter and remote transmitter, pre-tuned by the factory and ready in minutes just charge the included battery, attach the propellers and add 4 aa batteries to the remote and you’re flying.

 

DJI Zenmuse X5R

DJI Zenmuse X5R

DJI Zenmuse X5R - Quip your dji inspire 1 with micro four thirds imaging performance and the benefits of an interchangeable lens system with the zenmuse x5r raw camera and 3-axis gimbal with 15mm f/1. In addition to video, the camera can take 16-megapixel still photos with the option for burst and time-lapse modes. 7 lens. This 4k camera system features an integrated 3-axis brushless gimbal that provides stabilization and enables the camera to move independently of the aircraft.

 

LanLan DJI Zenmuse Gimbal H3-3D Part ZH3-3D-40 Damping unit securing kits -USA

LanLan DJI Zenmuse Gimbal H3-3D Part ZH3-3D-40 Damping unit securing kits -USA

LanLan DJI Zenmuse Gimbal H3-3D Part ZH3-3D-40 Damping unit securing kits -USA - Partgimbal. Fuel sourceelectric. Modelzenmuse. For vehicle typehelicopter.

 

DJI Zenmuse Z15-5D III HD 3-Axis Gimbal for Canon 5D Mark III

DJI Zenmuse Z15-5D III HD 3-Axis Gimbal for Canon 5D Mark III

DJI Zenmuse Z15-5D III HD 3-Axis Gimbal for Canon 5D Mark III - 02° maximum controlled rotation speed pan axis ±90°/s tilt axis ±130°/s roll axis ±30°/s controlled rotation range pan axis control ±360° continuous rotation tilt axis control from -90° to +15° roll axis control ±25°. 8 is usm gcu input power 4s~12s lipo battery control requirement four spare receiver channels at least assistant software system requirement windows xp sp3 windows 7 windows 8 (32 or 64 bit) mechanical & electrical characteristics working current static current 200ma (@25v) dynamic current 400ma (@25v) locked-rotor current 4a (@25v) operating temperature -10°c ~ 50°c weight 1. Fpv mode (reset) built-in independent imu module dji gimbal special servos drive module wireless video transmission supported camera shutter control supported wide range voltage input supported s-bus/ppm receiver supported peripheral supported camera canon eos 5d mark ii canon eos 5d mark iii current supported lens canon ef 24mm f/2. 5mm working performance load weight (reference value) 2615g(5d mark ii with sd card & battery & canon ef 24mm f/2. Non orientation-locked control. 8 is usm lens) 2664g(5d mark iii with sd card & battery & canon ef 24mm f/2. 1mm x19. Orientation-locked control. 2 mm x34. General built-in functions three working modes. 8 is usm lens) controlled angle accuracy ±0. 42kg dimensions 204mm x 242mm x 264mm gcu weight 63g gcu dimensions 64.

 

Qiyun DJI Original Replacement Phantom 2 GoPro FPV Video USB Output Connection Cable for Zenmuse H3-3D 3-Axis Gimbal Spare Part NO56

Qiyun DJI Original Replacement Phantom 2 GoPro FPV Video USB Output Connection Cable for Zenmuse H3-3D 3-Axis Gimbal Spare Part NO.56

Qiyun DJI Original Replacement Phantom 2 GoPro FPV Video USB Output Connection Cable for Zenmuse H3-3D 3-Axis Gimbal Spare Part NO.56 - Package includes gopro hdmi cable x 1. Dji original replacement phantom 2 gopro fpv video usb output connection cable for zenmuse h3-3d 3-axis gimbal spare part no56 . It is a “bare-wire” hdmi cable for connecting the gopro to an air-end hd video transmitter such as the one built into the lightbridge downlink unit.

 

DJI Zenmuse Z3 with 4K 7 x Zoom camera

DJI Zenmuse Z3 with 4K & 7 x Zoom camera

DJI Zenmuse Z3 with 4K & 7 x Zoom camera - This item includes dji phantom 2 v20 quadcopter, zenmuse h4-3d gimbal, phantom 2 remote control (part 13), 4 propellers, spare set of 4 propellers, landing gear (pair), phantom 2 quadcopter battery, phantom 2 vision battery charger, usb cab. Additional included items dji 1 year limited warranty on main controller, dji 1 year limited warranty on transmitter (radio controller), dji 1 year limited warranty on electronic speed controller, dji 3 month limited warranty on battery, dji 3 month. Dji drone camera zenmuse z3 cpzm000424 cmos retail. Quadcopter max yaw angular velocity 200 deg /s. Quadcopter hover accuracy vertical 26′ / 08m horizontal 82′ / 25m.